CNC AND EDM MACHINE

“A fire outbreak can catch you offguard when least expected. Your CNC and EDM machines are highly vulnerable to a fire outbreak.”

CAUSES OF FIRE

  • Presence of Neat cutting oil with flash point as low as 130ºC
  • Presence of Oil fumes within the grinding envelope, is more hazardous than the oil itself
  • Tool crash, grinding spark or extremely hot flying metal chips could ignite in the above scenario

CAUSING

  • Business downtime
  • Production loss
  • Revenue loss
  • Infrastructure loss
  • Loss of human life

IF, A FIRE IS IGNITED, THEN :

  • It literally becomes impossible to suppress with portable extinguisher, since the panel doors are always closed
  • Panel rooms are almost always unsupervised. Hence there is a considerable time lag from the start of the fire until people around are alerted

REDUCE YOUR INSURANCE PREMIUM ON CAPITAL GOODS

WEFIRE™ Solution

  • A linear pneumaticWEFIRE™ Heat Detection Tube is routed near the fire hazard which senses the heat of the fire at its insipient stage
  • This immediately activates clean agent gas discharge through discharge nozzles, suppressing the fire at its source
  • The gas is non-conducting, non-toxic and leaves no residue (CNC); hence does not contaminate the oil, neither does it spoil expensive electronics